Orders Over $100.00


Tung-Bar© Drift Boat Trailer Stands
xATVxx PWC xXUTVxx XFOR SINGLE-AXLE TRAILERSXxX BOATSXX DRIFT BOATS

For Questions or Orders Call (800) 310-1200

The #1 Choice of Drift Boat Stands by Professional Guides. No nuts, bolts or plates to rust, no added tongue weight, no pin to lose, and no lowered ground clearance are the main reasons for the overwhelming success of our newest line of Tung-Bar© Drift Boat Trailer Stands. For years drift boat trailer owners have used makeshift stands in the form of 2 x 4's, Cinder Blocks and Saw Horses to keep their boats drained.

Unfortunately these makeshift Drift Boat Stands lack necessities like safety, stability, ease of use and portability that can be found with a new Tung-Bar© Drift Boat Stand.

Ease of use: Our Drift Boat Stand will attach and unattach in 2 Seconds. Use it when you need it and keep your trailer light.

Lockable: Can be Locked directly to the trailer Safety Chains.

Light & Portable: At a mere 8.5 lbs. and 54 inches in length our stand easily fits in the back seat of a car.

Height Adjustable: The height is adjustable by attaching the Tung-Bar closer of further from the trailer hitch.


 

We applaud the creativity of our fellow boat owners to keep their boats drained during outdoor storage and elevated during wash-outs. Finally there is an elevated and portable stand designed specifically for outdoor storage and boat maintenance.

There are other Drift Boat Trailer Stands on the market, why is a Tung-Bar© Drift Boat Trailer Stand the best value for my dollar?

12 Reasons Why Tung-Bar© Stands Above the Rest

1. Tung-Bar© Drift Boat Stands do not add any weight to the trailer. This keeps the trailer light and easy to manuever manually.

2. Tung-Bar© Drift Boat Stands do not incorporate Nuts, Bolts, or Plates. Experienced boat
owner know that eventually nuts strip, bolts bend, and plates rust.

3. Tung-Bar© Drift Boat Stands will not lower the trailer ground clearance an added bonus especially since some river access roads are barely considered roads at all.

4. Tung-Bar© Drift Boat Stands will fit 99% of all Drift Boat Trailers on the market today. Different
manufacturers place spare tires or trailer jackes between the wench post and the trailer hitch.

5. Tung-Bar© Drift Boat Stands are easy to use and do not require placing an easy-to-lose pin to
secure the stand in place during travel or storage. Drift boaters are known for using unimproved
launch sites in the early morning hours or camping overnight where it would be easy to lose a
small pin in the dirt or the weeds. A missing pin is just one less hassle to ever deal with.

6. Tung-Bar Drift© Boat Stands are Clean Water Friendly due to our solid steel design. This
eliminates any chance of transporting any residual water which might harbor microscopic
Aquatic Invasive Species such as Quagga or Zebra veligers, New Zealand Mud Snails, or
Eurasian Milfoil just to name a few.

7. Tung-Bar© Drift Boat Stands do not utilize the hitch receiver as an attachment point which
prevents the hitch receiver from ever becoming damaged.

8. Tung-Bar© Drift Boat Stands are fully height adjustable by simply attaching them closer or
further from the hitch. There are no preset adjustments which might prevent complete
drainage since not all Drift Boats have drain holes in the same place.

9. Tung-Bar Drift© Boat Stands utilize a heavy duty rubber/resin material on the footing which is
highly abrasion and UV resistant to protect concrete surfaces from rust spots.

10. Tung-Bar Drift© Boat Stands attach and unattach as quickly as you can lift and lower your boat.
You can start draining out your boat in 2 seconds, then drain out your buddy's boat too!

11. Tung-Bar© Drift Boat Stands come with a Limited Lifetime Warranty. Should our Drift Boat
Stand ever fail for any reason we will replace it for FREE. We stand by our products forever.

12. Tung-Bar© Drift Boat Stands are attractively priced and in some cases are priced 66% below
other Drift Boat Stands on the market today.

McKelnick Industries LLC is the manufacturer of Tung-Bar© Products. The very cornerstones of our company are built on reputable customer service, original patent-pending designs and high quality products.

We have provided our fellow outdoor enthusiasts with Single-Axle Trailer Stands for ATV, PWC, UTV, Motorcycle, Snowmobile, and Boat Trailers across the United States and Canada since 2008.

Since the initial launch of our Drift Boat Trailer Stands on 1/1/2010 we have quickly won the confidence of Drift Boat Manufacturers, Professional Guides, Pro-Staffers, Outfitters and private Drift Boat owners nationwide.

Our entire staff is comprised with outdoor fishing and hunting entusiasts, as such we are a proud corporate contributor to many outdoor sportsmen conservation groups. If you represent an outdoor sportsmen conservation organization and need help in your fundraising efforts please contact us toll free at (800) 310-1200.

 



Tung-Bar© is a product of McKelnick Industries LLC.
Tung-Bar© Products are proudly produced in the USA
Tung-Bar© is The World's Only Portable Single-Axle Trailer Stand
xMcKelnick Industries LLC * 13601 W.McMillan Rd. #102-302xxxxxxxxxxx
xBoise, Idaho 83713xxxxxLegal | Privacy
xxxxxxxxxxxxxxxxxxxxxx xxx
Copyright 2008-2010 Tung-Bar.com, All rights reserved

Copyright 2009 Tung-Bar.com, All rights reserved